Видео

How can I contact you ?

what does that blue cable do?

I now only plane cut with bambu slicer. Since its slicer easily allows adding of alignment pins or dowels, its soooo much easier than meshmixer. The rest of the video was on point. Thinking about using this for some projects. One other tip, in construction, they use non specialty tools for vibrating forms. This is cheaper than buying a specialty concrete vibrating tool. I have personally used a jigsaw with no blade, or a sawzall with no blade. These can give better vibration than simple tapping.

Can I do the same with a 30w?

How to create dye

Where can I buy the mold? Or a template ? Stencil?

Mate you miss some steps. To get a uniform color you must add salt to your dye. The positive object should be in the middle of the negative. Negative side should be long on top and bottom so electrolysis can be 100%. Positive side should not touch the bottom. You can also do it in two steps. Once finish turn upside down and start process again before putting in dye. Don't forget salt is essential in dying process.

Add salt to the dye. It will stay permanently

very cool 😎

I think it would have been worth explaining why you split the mold the way you did, so people understand how to do it themselves. For those that don't know, the shape of the object you wish to cast dictates how you spilt the mold. You have to consider how the two halves will pull apart, considering the hardened concrete that will be inside. If @ArtByAdrock had split the mold 90 degrees from how he did, pulling the mold off would be almost impossible because of the ears protruding up into both sides of the mold. Although that TPU might allow for more careless mold slicing. I've been working on a project, basically the exact same thing. I printed my mold in PLA, but with it being so rigid, problems arose (the shape of the cast made it impossible to remove the mold) I thought I had it sorted out on my 2nd mold, but I still had some minor hang ups. I've got it dialed in now, but I won't be messing with PLA for molds anymore, for several reasons. I can't wait to get this TPU dehydrated and in the printer!

Looking to make full size Great Dane statues , what would you recommend …

That is super rad. Thanks for showing each step along the way for people not familiar with mesh mixer. How many shots have you gotten out of each mold before they become unusable?

Alternate meme method to make a concrete owl using a 3D printer: 1. 3D print some circles. 2. Cast the rest of the bleeping owl. If you know, you know. ;)

Ya life works this way. The guy on youtube with a zipper face is the one that also Lives in Vegas, makes 2x4 tables, has neptune 4 printers and makes cement molds from TPU. Bwhahahahaha Im in the Lakes. Dont tell me you like Jiu Jitsu and roast coffee also. Awesome channel by the way.

Why not use Prusa Slicer? You can do a planar cut and it automatically generates registration marks. Even making the hole is easier. 😅

The dremel tool with the wire brush destroyed it for me... just use a handbrush and isopropanol.....

How did you convert the stl into g code so that the CNC would cut the graphite

Very cool, my vote is for the Tumbler polished units, more vibrant color. Thanks for sharing.

for the Rubber bands it by be worth including a cylinder or two into the outer walls shape and splitting that along with everything. This would spread the rubber band force much more evenly especially for shapes that are not as rounded as the owl

Love it - definitely going to make something. Great video

Excellent work, friend. I have mentioned your channel in my videos. I enjoy the technical edge of your content, as I work in tech during the day. Great tutorial!

I would like to thank you for your videos. I’ve recently started to learn my Ray5 10w laser. Your videos have been very informative. Even though I have blindly tried a few things even my failures have given me a new perspective and more ideas. I’m genuinely excited to see what I can do with entry level laser. Thanks a million.

This is the exact tutorial I was looking for. Thank you!

Is Petrobond reusable?

Cool stuff sir.

Fantastic video. I will for sure make a larger scale statue for my yard. Thank you

Wow! I have been researching sofubi and silicon moulds for months and this whole time I have been thinking resin, resin, resin! It never occurred to me that I could make concrete casts! You have opened up a whole new avenue to explore! Thanks so much for making this video!

thank you, this is a really very useful video

Time to make a warhammer 40k battlefield out of my garden !

I just started stacking silver and thought about picking one of these up for my RUclips channel

What polish did you use?

Спасибо🙏💕🙏💕🙏💕 лайк🙏💕🙏💕🙏💕 👌👌👌👌👌🆗🆗🆗🆗🆗👍👍👍👍👍

Just huge, thank you for sharing this

Your awsome thanks for the vids

That is cool. 😊

I've been wanting to do this for so long. I was thinking of printing a positive and then casting that in silicon but I might try the TPU instead now. I didn't know mold release worked with TPU and concrete.

Hey everyone, quick video today on how to use your 3D printer and some TPU flexible filament to make some 2 part molds for casting concrete. This method will also work for resin or anything else you want to pour (besides high temp metal of course). I’m using Meshmixer but most 3D modeling software will do the same thing. Enjoy and I’ll see you all in the next one! 👍🏻

Beautiful, Thanks for Sharing.

No views or comments or likes in 60 secs

Hello , thanks for that video, I’m having the same problem, what’s the name of that wire piece? Thank you

FINALLY, a comprehensive tutorial on how to create a depth map!🔥👏🤩 Thank you, Thank you, Thank you!

You the new Toauto guy? I was not impressed with their quality and zero customer service.

I can’t saw much about the machine because mine never worked. It has a defective controller and I have been trying to get a resolution for two weeks. Their customer service and technical assistance are zero. All you get is “so sorry “ and will get back to me in 2 days. Only thing left is contact credit card company. Best of luck if you order one.

Is it also applicable in Glasses?

Hi, do you have a link to the brushes you used at the end of the video to clean and buff the coin?

I’ve been binge watching videos on this topic and this is probably the best presented way to get consistent and repeatable results. Thank you!

The turn table don't come with the Scanner...

Can that fiber cable be disconnected ?

Your walkthrough was more detailed and comprehensive than anything the manufacturer put out on their own site.

Slag consists of aluminium oxide. You'd limit it by putting cans through small opening in the top of your owen. Also higher temperature speed up this oxidation reaction.